QUALITY.SAFETY.VALUE.
800.918.3013
border

Don’t Miss This Unbeatable Industrial Fume Extraction Solution

border

Don’t Miss This Unbeatable Industrial Fume Extraction Solution

Imperial Systems’ CMAXX fume extraction system may just be the industrial fume extraction solution you’re looking for.

As a metalworker, you have probably already noticed the problems that can be caused by the constant presence of fumes while you are working.  Not only are the noxious fumes unpleasant, but they also pose a major risk to the the health of your employees.  With both concern for your workers and compliance with OSHA and NFPA standards in mind, you need an industrial fume extraction solution that can address the unique needs of your shop.

As you consider your options, be sure you don’t miss out on the CMAXX Fume Extraction System from Imperial Systems.  This uniquely designed systems offers high efficiency performance while being incredibly easy to use, a competitive combination in today’s market.

High Efficiency Performance

industrial fume extraction solutionThere’s no doubt that your first priority when it comes to an industrial fume extraction solution is its efficiency.  You need something that can get the job done without wasting time or energy.  The CMAXX Fume Extraction System can do all this and more.  With 100% total pulse distribution across the filter media, there is no dead zone from negative pressure that other systems have. Additionally, with up to 40% more cleaning power than the industry standard, you will benefit from up to twice the filter life.

In fact, the CMAXX system is designed for use with our DeltaMAXX cartridge filters, which deliver the longest filter life, cleanest air, and the greatest cost savings on the market. These filters incorporate the latest nanofiber technology, offering you a MERV 15 filtration efficiency, less pulse cleaning, and great surface loading technology. Together, Imperial Systems’ filters and extraction systems are designed to offer you the highest level of fume extraction efficiency on the market.

Unparalleled Usability

Of course, when it comes to actually selecting the industrial fume extraction solution for your shop, usability is also an important question to consider. After all, efficiency is lost if your employees have to spend countless hours setting up and maintaining a difficult system.

To respond to these concerns, the CMAXX Fume Extraction System comes completely wired from the factory, so you simply have to plug it in and push start when you receive it! Additionally, with tool-free filter access and filter change out, you won’t waste any time on the maintenance process.

Does This Sound Like The Industrial Fume Extraction Solution You Need?

Does this combination of usability and efficiency sound like something your metalworking business is looking for?  If so, find out more about our fume extraction system today by calling us at 800.918.3013.

Camfil FARR Cartridge Filters are Not Your Best Bet

Did you know that materials and nanotechnology could make the difference for your filter life?

What are the advantages of Camfil FARR cartridge filters?

You have probably heard of Camfil FARR cartridge filters as being long lasting, and standing up to the worst conditions. You certainly don’t want filter distortion or blowouts when it comes to metalworking. These types of errors in products can create major health and security concerns.

camfil farr cartridge filters

But are Camfil FARR cartridge filters all that they claim to be? Or could you possibly find a company that offers the same product at a lower cost, while boasting higher quality in material and technology innovation?

We’d like to answer that question for you.

Yes.

Imperial Systems has been rated above Camfil Farr in satisfaction surveys with the product, which breaks down to higher quality development processes, materials, and advanced technology.

We offer double the filter life for our air filter bags. We use advanced nanofiber technology and offer MERVE 15 filtration efficiency for a higher quality product.

Camfil FARR filters use an exclusive media bonded to a welded wire grid for filtration technology, which they claim will hold more dirt/dust for longer. However, this means that their product is made of several materials, which is still not optimal. We have innovated in the industry, offering the most advanced NanoFiber technology available in filters (which is how we can guarantee a filter life double that of most other companies in the industry). The nanofiber stops submicron particles from becoming embedded. We also use a heat sealed airbag, so that fine particles can’t leak out. Our loading technology operationalizes dust take release, another factor leading to our longer filter life. Last, our pleated media is also of the highest quality. We offer 99.9% efficiency .3 to .5 micron –hard to find in most parts!
If you want to know what it feels like to work with the best in the dust collection and air filtration industry, talk to us. Our representatives are available to talk anytime and answer any questions you have. Our goal is to ensure that you have the safest and most economical dust filtration experience possible. For safety, quality, and value, call 800-918-3013.

camfil farr cartridge filters  | cartridge filters camfil farr

Why You Won’t Survive Without An Industrial Dust Control Company

The metalworking industry can be a risky and sometimes fatal, business. Let Imperial Systems pave your way to safety.

Industrial Dust Control CompanyIn January of 2003 there was a polyurethane dust explosion caused by dust accumulation on the ceiling of a pharmaceutical plant in Kentucky, where 6 lives were lost and 38 were injured.

Surprisingly, many facilities think that it will never happen to them. Their employees will stay healthy and safe, as long as they are following the guidelines and rules of the company. Have you ever thought about the guidelines and rules your industrial dust control company is following?

Injuries And Fatalities Follow Improper Dust Control

In February of 1999 a dust fire in a plant in Massachusetts killed 3, injured 9. The reasons for explosion were lack of dust control, inadequate ventilation system design and lack of maintenance of ovens and safety devices.

Understanding Combustible Dust Explosions

Just because there is dust lying around, doesn’t mean that there is going to be an explosion. If that is the case, most of our homes would have exploded a long time ago. In the metalworking industry, the situation is not the same. The importance of hiring a thorough industrial dust control company is imperative for a safe, reliable facility.

Combustible dust fires occur when fuel, heat and oxygen are present. Commonly called, “The Fire Triangle”, there are 2 factors in addition to this triangle.

  1. Dust particles must be in heavy concentrations
  2. Dust must be partially confined to one area

Combustible dust ignites and burns at a mind-blowing rate, when confined, due to the inability to diffuse from proper ventilation.

An industrial dust control company will look for potential hazards in your facility.

5 Potential Hazards In Your Metalwork Facility

  1. There is presence of combustible dust that may be released into the air
  2. Materials are processed into tiny particles
  3. Areas that dust can accumulate for a long period of time are present
  4. Activities that the consumption or production of combustible dust is present
  5. A reason that dust will find a source for ignition

With a leading industrial dust control company like Imperial Systems, you will receive quality service and products ensure that hazards will be controlled. Imperial Systems carefully follows strict OSHA guidelines with production of all products.

Some of our products include:

  • CMAXX Dust Collector System – designed with cutting-edge PD technology, it has 10% more filter media than other filters, to allow maximum cleaning performance.
  • DeltaMaxx Cartridge Filters – With 2x the filter life of standard filters, DeltaMaxx is made from Nanofiber technology that prevents submicron particles from being embeded in the media.
  • CMAXX Laser Fume Extraction System – Completely wired from the factory, all you have to do is plug it in and press start. With the same guarantees as the CMAXX Dust Collector, you won’t be disappointed.
  • Duct and Fittings – Imperial Systems delivers a variety of duct and fittings, all custom to fit your system.
  • Spark Arrestors (Traps) – With heavy duty construction, customizable fittings and material, easy install and no water requirement, your satisfaction will be met.
  • And more!

Quality Service Guaranteed

We cannot tell you the type of equipment or service the above companies received, before these explosions and fatalities happened. What we can tell you, is that our service is guaranteed.

Imperial Systems will inspect each product, and personally install the equipment in any facility. Our dust collectors require minimal maintenance and if maintanence ever is needed, our experts here at Imperial Systems is here to help.

When looking for Industrial Dust Companies in your area, remember that Imperial serves over North America in both the United States and Canada.

If you would like more information on the different options we have available to you, call 1-800-918-3013.

Industrial Dust Control Company | Industrial Dust Control Companies

Competitive Replacement Filters are Not Your Best Bet

Did you know that materials and nanotechnology could make the difference for your filter life?

What are the advantages of the competitive replacement filters?

competitive replacement filtersYou have probably heard of the competitive replacement filters as being long lasting, and standing up to the worst conditions. You certainly don’t want filter distortion or blowouts when it comes to metalworking. These types of errors in products can create major health and security concerns.

But are competitive replacement filters all that they claim to be? Or could you possibly find a company that offers the same product at a lower cost, while boasting higher quality in material and technology innovation?

We’d like to answer that question for you.

Yes.

Imperial Systems has been rated above their competition in satisfaction surveys with the product, which breaks down to higher quality development processes, materials, and advanced technology.

We offer double the filter life for our air filter bags. We use advanced nanofiber technology and offer MERV 15 filtration efficiency for a higher quality product.

Competitive replacement filters use an exclusive media bonded to a welded wire grid for filtration technology, which they claim will hold more dirt/dust for longer. However, this means that their product is made of several materials, which is still not optimal. We have innovated in the industry, offering the most advanced NanoFiber technology available in filters (which is how we can guarantee a filter life double that of most other companies in the industry). The nanofiber stops submicron particles from becoming embedded. We also use a heat sealed airbag, so that fine particles can’t leak out. Our loading technology operationalizes dust take release, another factor leading to our longer filter life. Last, our pleated media is also of the highest quality. We offer 99.9% efficiency .3 to .5 micron –hard to find in most parts!

If you want to know what it feels like to work with the best in the dust collection and air filtration industry, talk to us. Our representatives are available to talk anytime and answer any questions you have. Our goal is to ensure that you have the safest and most economical dust filtration experience possible. For safety, quality, and value, call 800-918-3013.

competitive replacement filters | competitive replacement filter

See How the CMAXX Stays 2 Steps Ahead of the Competition

Find out how this top dust collector stays ahead of the competition…and how it can help you do the same!

cmaxxIn the industrial manufacturing business, you need to be tough.  As you balance hard work, demanding clients, and the highest safety standards, there is a lot at stake every day.  And just as much as you depend upon your hardworking team, you also expect your equipment to hold up under pressure as well.

This is especially true of safety equipment, such as your industrial dust collection systems.  But if your systems can’t hold up to the heavy load, or harsh conditions, it is time to find an alternative.  Begin by discovering what sets the top dust collector apart from the competition.

 

healthFrom metalworking to food processing, each of these unique industries brings its own challenges, but all share the same demands for the utmost safety and long-lasting equipment.  At Imperial Systems, we take these concerns and needs seriously.  So, when it came time to design and manufacture our innovative dust collection system, we incorporated the latest technology with unique designs to create the top dust collector in the industry.

How does our CMAXX dust collector stay two steps ahead of the competition?  The answer lies within our unique system advantages and our latest design updates.  Discover the difference today to take the next step towards a cleaner, safer, and longer lasting dust collection system.

The Challenge

Whether your manufacturing processes involve welding, woodworking, or even just moving food or grain products, dust can pose at least three major challenges. These include:

stat
(http://www.dustexplosion.info/statistics.htm)

 Screenshot on 2015-04-10 at 13-07-46

  • Inhalation. According to the World Health Organization, regularly breathing particles in has “the potential to cause harm either locally or subsequently elsewhere in the body.”  Several OSHA standards seek to address such risks.(http://www.who.int/occupational_health/ publications/en/oehairbornedust3.pdf)

 

  • Combustion. Dust explosions are another major risk. Between 1980 and 2005, the US Chemical Safety and Hazard Investigation Board identified 281 combustible dust incidents.  Collectively, these incidents were responsible for the deaths of 119 workers, 718 injured, and numerous damaged facilities.  Despite new standards, OSHA still estimates that there are approximately 30,000 U.S. facilities at risk for combustible dust explosions.
    (https://www.osha.gov/dsg/combustibledust/)(http://www.grainger.com/content/safety-control-combustible-dust)

Screenshot

  • Contamination. In certain fields, especially in food processing, contamination is also a significant concern.  Not only can dust affect employees and equipment, it can also harm products. (http://industrialdustcollectors.blogspot.com/2014/07/dust-collector-compliance-with_18.html)

 

With such high stakes, it is imperative to have an efficient, dependable, and long-lasting dust collection system.

 

The Competition

Other industrial dust collection manufacturers have attempted to address these concerns in their dust collection systems.  They have worked hard to create dust collectors that will hold up to NFPA and OSHA standards which have continued to evolve in recent years.

dangerHowever, at Imperial Systems, we believe that simply meeting these standards is the bare minimum.  After all, every industrial dust collection unit ought to be offering you such certifiable protection.  The differentiation, then, begins with the performance of the unit.

A top dust collector should offer you the highest efficiency in order to help you save on costs while offering the utmost filtration.  Additionally, you need a system that can withstand the heavy loads, and even the harsh elements, often involved in the world of manufacturing.

Sadly, many high performing industrial dust collection systems are not made to last.  Our competitor’s unit that is closest to the CMAXX collector has close to 68 feet of sealed connection and approximately 160 bolt holes with over 1000 holes throughout the collector from the bolted panel.  This outdated fabrication style puts the whole system at risk for leaks, rust, and ultimately, damaged equipment.

 

Top Dust Collector Advantages

cmaxx2At Imperial Systems, we are proud to say that our CMAXX Dust Collector System is one of the top dust collectors on the market.  In addition to satisfying all of the latest NFPA and OSHA standards, it also outperforms the competition.  But really, it is no surprise that this is one of the highest performing units available when you consider the many advantages built into its advanced design.

With our vertical cartridge design and PD technology, our system offers up to twice the filter life of similar units.  At the same time, we offer the cleanest plant air at a lower price with our high efficiency design that includes both manifold mounted pulse valves and 100% total pulse distribution across the filter media.

Other system advantages include:

  • A space-saving, low-profile design
  • The lowest internal velocities from a larger housing
  • Less service time with our tool-free filter door
  • Factory assembled air header and top section
  • Less Internal build up because of no internal frame on the dirty air plenum
  • High quality Goyen GoCo cone nozzles located closer to the filter media

 

Additionally, our slanted inlet design prevents water built up while more evenly distributing dust and particulates throughout the filters.  Collectively, these advantages not only provide up to 40% more cleaning power than the industry standard, but they also save you time, effort, and money along the way.

The CMAXX dust collector is also built to last.  We have designed it with military grade door latches, rather than the less dependable truck trailer hardware.  We also added corrosive resistant paint inside and out and heavy duty nickel plated hardware.  With such dependability, not to mention our 15 year warranty, you can have confidence in your CMAXX Dust Collection System.

 

More Advantages With The Latest Update

boltsOf course, at Imperial Systems, we’re never content with the status quo.  We believe that there is always something we can be doing to innovate and improve our products to better serve manufacturers like you.  We value the safety, efficiency, and durability of our products and we know that you do too.  So, we’ve made some updates to our already outstanding dust collection system based on one of the most common challenges in the field; weather.

Many dust collection systems are subject to the potentially harsh external elements.  For many years, rust, leaks, and warping have been common results.  These resulting defects, however, can compromise the integrity of the unit, undermining the very safety it is supposed to provide.  Clearly, a change is needed.

And change is exactly what you will find in the new, domed roof design of the CMAXX dust collection system.  We’ve taken not just one stand, but four, against the potential dangers of water damage and leaking:

 

  • Solid, One-Piece Roof.  With no individual panels, this innovation offers a stronger design while eliminating the risks of warping and leaks through the roof.
  • Positive Bow.  This shape allows water and debris to run off more easily, making the whole unit easier to clean.  Additionally, there is no chance for freezing water to pool up on top of the unit and cause potential damage.
  • No Bolt Holes.  Without any external bolt holes, our system is completely sealed.  This guarantees against both leaks and rusty bolts which may break or loosen.
  • Heavy Duty Construction.  Our 3/16” thick roof is fully welded with all welds ground smooth.  Additionally, ¼” plate internal stiffeners offer further reinforcement.

 

With the latest advantages offered by our innovative roof and exterior design, Imperial Systems has taken a significant leap forward in dust collection system design.  Combined with previously existing features, this system will continue to perform at the top of the industry today, and for years to come.

 
checklist

Are You Ready To Invest In Your Future Safety?

How long have you had your current industrial dust collection system?  How is it holding up?  Share your stories with us in the comments section below.

Then, if you want more information, or if you are ready to make the change and install a system that is uniquely designed for high-efficiency and longevity, give us a call at Imperial Systems.  You can reach us at 800.918.3013.

Avoid These Mistakes: Hire a Professional Dust Control Firm

These problems can be avoided with the aid of a professional dust control firm.

Hire a professional dust control firm? Like many others, you might scoff at the idea. Really, what is dust, anyway? Surely, dust could not pose any serious problems in your workplace.

dust-control-firm

According to most definitions, dust is the fine, dry particles of earth or waste matters which combine to form a light, dry powder. You may see this powder lying on the ground, other surfaces, or floating in the air. Could this often barely visible material really cause hazards and other problems in your workplace, though? The short answer: Absolutely yes.

According to the World Health Organization (WHO), “Year after year, both in developed and in developing countries, overexposure to dusts causes disease, temporary and permanent disabilities and deaths. Dusts in the workplace may also contaminate or reduce the quality of products, be the cause of fire and explosion, and damage the environment.”

If these facts give you cause for any concern at all about the conditions in your workplace, we highly recommend reconsidering the services of a professional dust control firm. A professional dust control firm can help you tackle dust management and thereby the potential problems of dust in your place of business or production.

Professional Dust Control Firm Services

A reliable, professional dust control firm such as Imperial Systems will be able to provide you with multiple dust control services. Some of those services may include:

  • Extraction of these hazardous dusts, identified by WHO:
    • mineral dusts from the extraction and processing of minerals (these often contain silica, which is particularly dangerous);
    • metallic dusts, such as lead and cadmium and their compounds;
    • other chemical dusts, such as bulk chemicals and pesticides;
    • vegetable dusts, such as wood, flour, cotton and tea, and pollens;
    • moulds and spores.
  • Ease of safe waste disposal
  • Maintenance of dust removal equipment
  • Integrated dust management systems which provide comprehensive coverage of dust control in your workplace
  • Choices of dust control equipment designed to efficiently extract certain dust materials
  • Specific combinations of equipment to take care of your dust control needs

Compliance with World Health Organization workplace safety standards is one way to vastly improve the conditions in your workplace, even if it means controlling dust. To understand more about why you may need to hire a professional dust control company, contact Imperial Systems today.

Imperial Systems is among the top dust collection equipment manufacturing businesses in North America, and will be sure to take care of your dust problem. One of our representatives will be happy to schedule an assessment and provide a quote for you, at your convenience.

Professional Dust Control Firm | Professional Dust Control Company

3 Reasons Your Facility Is In Desperate Need Of A Professional Dust Control Service

When your facility needs some tender loving care, Imperial Systems will pick you up and dust you off.

Let’s not sweep this issue under the carpet. The metalworking industry can create alot of dust. What do you do with that dust? Does it fall to the ground and get swept up throughout the day? Does it lay across your desk or machinery until there is that one person that can’t handle it anymore and they clean it up? What if I told you that you need a professional dust control service?

Here’s Why professional dust control service

  1. You’re compromising the health of your employees and yourself. When it comes to dust, you might think it’s an issue you can just brush off your shoulder, but you’re wrong. Some illnesses and cancers such as Mesothelioma can develop in people who are exposed, but it can take 20-50 years to manifest itself in the form of cancer in an individual. There are between 2,000 and 3,000 new cases every year. Hiring a professional dust control service will significantly lower the risk of contacting this cancer amongst other illnesses related to dust.
  2. You may be wasting time. If your facility has layers of dust over machines and desks, there’s a good chance that you or your employees have to take time to remove the dust, and be sure that the product being fabricated is free of dust and debris. Let’s say that it takes an average of only 15 minutes a day per employee to clean off areas filled with dust, to ensure the quality of their product. With 15 minutes per day, multiplied by 20 employees, which brings a total of 5 wasted hours, cleaning up dust. This is where a professional dust control service would help greatly.
  3. You are undoubtedly wasting money without a professional dust control service. You are playing roulette with putting the health of your employees at risk, allowing your employees to waste valuable time cleaning and pouring money directly into places that are not a good return on investment.

The dust floating around your facility are made up of fine particles of metals, plastic, asbestos and fumes from all the welding, cutting and molding you may be doing. It is imperative that you have an OSHA compliant dust collecting system.  For over 10 years, Imperial Systems has been a leading professional dust collector service company in North America.

By utilizing a professional dust collector service, you will have dust collection at your fingertips. Imperial Systems offers high-quality professional dust collector service with our customized systems. Give us a call  and improve your employees health today!

  • donaldson replacement dust collector filters

Why You Shouldn’t Purchase Donaldson Replacement Dust Collector Filters

Imperial is here for your dust collector needs!

You know the importance of providing quality dust collectors and fume extractors for your employees who operate in the metalwork industry. There are gasses and metal particles flying in the air at all times, and you need to keep your employees as healthy as possible by preventing them from acquiring diseases such as Mesothelioma and Lung Cancer.

donaldson replacement dust collector filtersIn order to do this, you should be operating a highly efficient Dust Collector System or Fume Extraction System. If you don’t have one or are not satisfied with what you have, Imperial Systems would be more than happy to help you in establishing a new system to clear the air in your building.

Along with operating a highly efficient system, you may be already using the Donaldson replacement dust collector filters. Donaldson has been known for their quality products. Made with nanofiber technology, the Donaldson replacement dust collector filters are made of a very tight-knit surface that is beneficial for your dust collection system in a number of ways, using Nanofiber Technology.

4 Benefits of Nanofiber Technology:

  1. High Efficiency: The average filter takes time to warm up and work best on it’s most efficient level because the surface level becomes more substantial as it collects dust. But a filter built with nanofiber technology does not need any time to warm up because the surface level is already substantial to begin with.
  2. Cleaning is Easy: The tight-knit surface of the nanofiber filters keep the dust from penetrating deep into the filter, allowing for easy clean up to save time and energy.
  3. Long Filter Life:The nanofiber design allows for a single filter to be sufficient for a long period of time, allowing you save money on replacement filters.
  4. Customized Filters: The nanofiber layer can be created in many shapes, sizes and media necessary for a filter to work. In this case, nanofiber filters can be used in any dust collection system in the workplace.

So you may be asking yourself, “Does it get any better than this?” YES! Imperial Systems would like to present to you, DeltaMAXX.

The advantages of DeltaMAXX replacement filters surpasses Donaldson replacement dust collector filters in quality, price and service. They are designed vertically to yield more efficiency as compared to Donaldson’s replacement dust collector filters.

Our DeltaMAXX replacement dust collector filters provide:

  • MERV 15 filtration efficiency
  • Up to twice the filter life with Nanofiber Technology
  • Highest quality pleated media
  • Lower operational mass emissions
  • Reduced dust collector operational costs
  • The Industry’s best surface loading technology
  • Less pulse cleaning

If you want to avoid large price tags and impersonal service that comes with big name companies, give Imperial the chance to serve you. Enjoy Imperial’s quality products, professionalism and friendly customer service.

Contact Imperial Systems today and let us show you what real quality looks like!

 

A Professional Dust Collector Firm with All the Answers: What You Need to Know About Dust

What don’t you know about the dust you’re producing? Learn about it from your local professional dust collector firm.

Dust collection is an important process to protect your employees and keep your work environment accident-free. Who would ever guess that dust could be so dangerous? While the general public won’t be aware of this issue, as a manufacturing or metalworking company, you realize that it’s vital—especially in today’s regulatory climate. A professional dust collector firm can help you by ensuring that you have the correct systems in place to prevent dust-initiated accidents.

Imperial Systems, an expert professional dust collector firm, provides the basics about manufactured dust, its risks, and how to combat them using dust collectors.

What is the problem with dust?

Simply put, dust can be a highly flammable substance that may result in fires. Because of dust’s combustible properties, it can become a fuel when it has been accumulated over time from industrial processes. Oftentimes it may travel down pipes or remain within the operations systems, creating an entire chain of dust fuel!

This possesses serious risks for employees working around the dust. Since the year 2000, there have been many documented explosions within factories that did not take proper precautions in regards to dust collection and education of employees.

What is a dust collector?

What do we mean when we talk about dust collectors? We’re referring to the system utilized to improve air quality that is released from industrial processes. The dust collector should handle dust loads by removing dust from the air—different from air cleaners, which have the filter.

A professional dust collector firm should provide you with a comprehensive system that goes beyond a simple air cleaner. This system is comprised of a blower, dust filter, filter-cleaning system, and a dust receptacle. It is also referred to as an air pollution control device, which is understood to maintain air quality.

What do dust collectors do?

Dust collectors recover valuable granular solids from process streams or remove solid contaminants before they are ventilated into the atmosphere. They are distinguished from mist collectors, which are used for metal working to remove liquid from the air. Dust collectors also function differently from fume/smoke collectors, which remove particulate matter from the air during industrial processes such as welding, rubber making, tempering, and quenching.

How to tell if my dust is dangerous?

Two types of dust testing help you to pinpoint the particular properties of dust, including its potential combustibility. These are: bench testing, and explosibility testing.

Bench testing requires a series of tests. Particle size analysis shows the dust’s particle size to decide the filtration intensity required to follow emissions regulations. This test reveals the count, or number of particles of that size, and the volume/mass spread of the dust. Many dusts are mixed, making this an important testing standard.

You can also use moisture analysis by using a humidity chamber to see how rapidly dust absorbs moisture. This is a good test to use in case of moisture problems, but it is not important 100% of the time.

On the other hand, the explosibility testing should never be skipped. A lab will use a screening test to measure if your dust could be combustible. If that possibility exists, the test will continue forward, measuring dust cloud parameters to determine the rate of pressure rise and the maximum pressure of a contained explosion.

Who can help?

Imperial Systems is a well-established professional dust collector firm within the industry of dust protection for over a decade. We are equipped with every system part you should require to ensure maximal dust safety in your workplace. Our consultants are professionals who can help you improve your systems by learning about your particular business. To get in contact with us, please call 800.918.3013 today.

professional dust collector firm  | collector firm professional dust

  • Donaldson Torit Dust Collector Filters

Why You’re Making A Mistake By Purchasing Donaldson Torit Dust Collector Filters

We guarantee the quality of our products, along with the expertise of our customer service representatives.

It gets a bit dusty in the metalworking industry. Between the forming, cutting and joining of metalwork, highly efficient dust collector filters are needed to collect and process the dust that is aimlessly floating around in your facility. The metalworking industry is familiar with Donaldson Torit Dust Collector Filters, but it is a beginning of a new era with Imperial Systems’ DeltaMAXX Dust Collector Filters.

Like Donaldson Torit Dust Collector Filters, DeltaMAXX is made of Nanofiber technology that provides:

  • donaldson torit dust collector filtersHigh Efficiency: The average filter takes some time to warm up to work on its most efficient level because the surface level becomes more substantial as it collects dust. A filter built with nanofiber technology does not need any time to warm up because the surface level is substantial to begin with.
  • Easy Cleaning: Due to the tight-knit surface level, the dust that was collected stays on that surface rather than penetrating through the filter. This saves time and energy during the cleaning process.
  • Longer Filter Life: The nanofiber design allows a single filter to be sufficient for a longer period of time which means less money spent on replacement filters and less time spent replacing these filters.
  • Customization: A nanofiber layer is able to be applied to many sizes, shapes and media that is necessary for a filter. This means you can be sure that the nanofiber filters can be used in your dust collection system in your workplace, including ones that are not made by Imperial Systems (although we would love to update your current, in this case, just click here for more details).

Why choose DeltaMAXX Dust Collector Filters over Donaldson Torit Dust Collector Filters?

If you have not had the pleasure of allowing us to assist you in your dust collecting needs, you will soon find out that we are #1 in:

  • Quality: Imperial Systems is known to be among the top dust collector manufacturing equipment companies in North America. Imperial’s values are also built on providing our customers with custom designed industrial dust collection systems with the strongest, most durable fabrication that will exceed our customers expectations and meet their needs.
  • Price: Donaldson Torit Dust Collector Filters have been around for quite some time, and carry a big name. Big names are known to carry high price tags as well. Here at Imperial Systems we pride ourselves on offering more affordable prices to allow you to do more with your company.
  • Service: Because of the passion we have for our commitment to safety, quality and value, we can guarantee that you will receive the most excellent and thorough customer service than with any other company. Our goal is to keep your company safe and healthy from toxins floating in the air. We promise to provide excellent service to you and your staff, regardless the circumstance.

So, next time you are ready to order those Donaldson Torit Dust Collector Filters, be sure to edit that listing and replace it with DeltaMAXX Dust Collector Filters instead. You will be happy you did!

Please visit our product page to view the other dust collection equipment we offer, or call us at 1-800-918-3013.